Insulated Roof Panel Systems
Trimdek-profile PIR and EPS insulated roof panels for cold storage, warehouses and industrial buildings across Melbourne and Victoria.
Trimdek Insulated Roof Panels for Cold Storage & Warehouses
Square IPC supplies and installs Trimdek-profile insulated roof panel systems across Melbourne. Cores, thicknesses and finishes are specified for the building — thermal performance, fire rating, vapour control and span requirements.
- Trimdek-profile PIR & EPS insulated roof panels
- Cold storage & freezer warehouse roofs
- Distribution centre & industrial roof systems
- Sealed joints, flashings & penetration detailing
- Panel thickness matched to R-value target
- Coordinated with wall panel & door works
R-values, fire ratings and core selection.
Thermal Performance
PIR roof panels deliver R2.8 at 75mm through to R7.9 at 200mm. Panel thickness is matched to the internal set-point and roof exposure.
Fire Rating
PIR cores are specified where fire performance matters — cold storage, food production and higher-risk industrial buildings. EPS suits lower fire-load warehousing.
Spans & Profile
Trimdek-profile panels span common industrial purlin spacings and integrate with standard roof drainage, penetrations and safety mesh.
How a roof panel install runs.
- 01
Survey & specification
Site measure, thermal target, fire requirements and coordination with structure, drainage and services.
- 02
Panel supply
Trimdek-profile PIR or EPS panels ordered to length, core, thickness and finish. Flashings and trims specified in the same package.
- 03
Lift & fix
Panels lifted, aligned and fixed to purlins with sealed side-laps. Penetrations flashed and detailed as work proceeds.
- 04
Seal & handover
Joints and penetrations sealed for vapour control. Roof handed over with as-built detailing and maintenance notes.
Need a cold room, door, panel repair or site inspection?
Send us the drawings, a few photos or a short description of the issue. We'll review it and let you know what's needed.